Logo image
Back
Virtual Inertia Planning for Enhancing Grid Stability in Low-Inertia Systems
Journal article   Open access   Peer reviewed

Virtual Inertia Planning for Enhancing Grid Stability in Low-Inertia Systems

S. Saha, M. I. Saleem, T. K. Roy and Amanullah M. T. Oo
IET Energy Systems Integration, Vol.7(1), pp.1-28
2025
DOI: https://doi.org/10.1049/esi2.70019
pdf
IET Energy Syst Integration - 2025 - Saha - Virtual Inertia Planning for Enhancing Grid Stability in Low‐Inertia Systems5.58 MBDownloadView
Published VersionCC BY V4.0,  Open Access

Abstract

BESS power system stability renewable energy sources virtual inertia
The global power grid is undergoing a significant transition with the increasing integration of renewable energy sources (RESs). This shift, characterised by a decline in conventional synchronous generators and a rise in inverter-based RESs, has resulted in reduced grid inertia, posing substantial challenges to frequency stability. To address these challenges, this paper proposes a reliability-aware optimisation framework for virtual inertia planning in grids with high RES penetration. The framework accounts for stochastic variations in load demand and renewable generation and optimises the required virtual inertia to ensure frequency stability during a contingency involving the largest generating unit. A reliability-driven methodology is integrated to determine the necessary virtual inertia constants and energy reserves in battery energy storage systems (BESSs) on an hourly basis, ensuring that the frequency nadir and RoCoF constraints are met under varying system conditions. The case study illustrated how the proposed approach determines BESS virtual inertia support requirements on an hourly basis, adapting to fluctuations in available system inertia and RES output. For instance, at 12:00 corresponding to peak solar generation, the required BESS inertia constant and energy reserve were determined to be 1.65 s and 2.56 MWh for 50% reliability increasing to 3.57 s and 5.27 MWh for 90% reliability. The total BESS capacity required was 76.3 MWh for 90% reliability compared to 46.25 MWh and 57.78 MWh for 50% and 70% reliability, respectively. These results underscore the significance of reliability aware inertia planning as higher reliability levels necessitate greater inertial support to mitigate the impact of contingencies involving the largest generating unit. Notably, during peak solar hours (e.g., 11:00, 13:00 and 15:00), the percentage of frequency constraint violations is reduced from nearly 100% to 4.38%, 9.86% and 7.12%, respectively, when virtual inertia support from BESS is applied at 90% reliability. An economic evaluation was carried out to assess BESS performance under different reliability targets. The results show that although annual benefits remain positive, the benefit-cost ratio declines from 1.12 at 50% to 1.06 at 90% and the NPV decreases from 2.06 M AUD to 1.50 M AUD. This indicates that higher reliability improves frequency stability but requires greater BESS investment, leading to diminishing economic returns. In this context, the proposed framework offers grid operators a decision-making tool to set reliability targets consistent with grid codes, contingency standards and investment capacity.

Details

Metrics

2 File views/ downloads
12 Record Views
1 Times Cited - Web of Science

InCites Highlights

These are selected metrics from InCites Benchmarking & Analytics tool, related to this output

Collaboration types
Domestic collaboration
Web Of Science research areas
Energy & Fuels
Engineering, Electrical & Electronic
Logo image