Comparison of Productivity, Cost and Chip Quality of Four Balanced Harvest Systems Operating in a Eucalyptus globulus Plantation in Western Australia

Martin Strandgard; Richard Mitchell; John Wiedemann

Back

Comparison of Productivity, Cost and Chip Quality of Four Balanced Harvest Systems Operating in a Eucalyptus globulus Plantation in Western Australia

Journal article

Open access

Peer reviewed

Comparison of Productivity, Cost and Chip Quality of Four Balanced Harvest Systems Operating in a Eucalyptus globulus Plantation in Western Australia

Martin Strandgard, Richard Mitchell and John Wiedemann

Croatian Journal of Forest Engineering, Vol.40(1), pp.39-48

2019

Files and links (2)

pdf

PDF - Published Version (Open Access)293.55 kBDownload View

Published VersionPDF - Published Version (Open Access) Open Access

url

http://www.crojfe.com/site/assets/files/4267/strandgard.pdfView

Webpage

Abstract

Forestry Sciences

forest harvest system

cut-to-length

infield chipping

Eucalyptus globulus

wood chip

balanced system

There have been few comparative harvest system studies to provide a basis to understand the performance and chip quality of harvest systems used in eucalypt plantations. The study compared the CTL - cut-to-length method at the stump, WTM - whole tree method where trees were processed to logs at roadside, IFC-DDC - infield chipping using a debark/ delimb/chipper, IFC-F/C - infield chipping using a separate flail and chipper harvest systems on a single site in south-west Western Australia. The WTM and IFC-F/C harvest systems were the most productive. The productivity of the CTL and IFC-DDC harvest systems was about 25% less than that of the other harvest systems. The CTL harvest system produced wood at the highest cost resulting from it having a large number of machines without a correspondingly high productivity level. However, the CTL harvest system has advantages over the other systems through retaining evenly distributed logging residues, low machinery impact on the site and flexibility to add or subtract machines as conditions change. Two limitations of this study were that the harvest systems were only compared at a single mean tree size and operator performance differences may have influenced harvest system productivity. Previous studies have found that the balance of machines in a harvest system can change with changes in mean tree size. This is an area where further research is required. Wood chip samples from three of the four harvest systems did not meet the company chip specifications. However, the deviations from the specifications were minor.

Details

Title: Comparison of Productivity, Cost and Chip Quality of Four Balanced Harvest Systems Operating in a Eucalyptus globulus Plantation in Western Australia
Authors: Martin Strandgard (Author) - University of the Sunshine Coast
Richard Mitchell (Author) - University of the Sunshine Coast
John Wiedemann (Author) - Western Australian Plantation Resources (WAPRES)
Publication details: Croatian Journal of Forest Engineering, Vol.40(1), pp.39-48
Publisher: Sveuciliste u Zagrebu
Date published: 2019
ISSN: 1845-5719
Copyright note: Copyright © 2019 CROJFE. Originally published in CROJFE. Strandgard, Martin; Mitchell, R; Wiedemann, John. 2019. Comparison of Productivity, Cost and Chip Quality of Four Balanced Harvest Systems Operating in a Eucalyptus globulus Plantation in Western Australia. 40: 39-48
Organisation Unit: University of the Sunshine Coast, Queensland; Forest Industries Research Centre; Forest Research Institute
Language: English
Record Identifier: 99451362902621
Output Type: Journal article

Metrics

54 File views/ downloads

579 Record Views